And then, the product is decorated with Ag nanoparticles for H2O2 and glucose detection. However, www.selleckchem.com/products/elafibranor.html all these abovementioned method did not have the advantage of controlling the size of SiO2. Accordingly, the development of new preparation strategy overcoming the shortcoming is highly desired. In our previous work, we introduced an easy and facial methodology to prepare functionalized graphene nanoplatelets (f-GNPs/SiO2) hybrid materials, using polyacryloyl chloride (PACl) as the bridge to connect graphene platelets and SiO2 particles. We have also introduced a facile approach to prepare multiwalled

carbon nanotubes/graphene nanoplatelets hybrid materials. In this paper, we proposed a strategy to situ prepare SiO2 particles with similar sizes onto the surface of graphene nanosheets. The schematic diagram of reaction is illustrated in Figure  1. At first step, graphene nanosheet was acid treated by H2SO4/HNO3 (30 ml/30 ml) at 140°C for 1 h. Then, polyacrylic acid (PAA) was grafted onto the surface of f-GNPs through chemical bond C-O. And KH550 reacted with above mention product PAA-GNPs through chemical bond C-C = O to obtain siloxane-GNPs. Finally, the SiO2/GNPs hybrid material is produced through introducing siloxane-GNPs into a solution of tetraethyl orthosilicate, ammonia Ivacaftor datasheet and ethanol for hours’ reaction. This approach is easy to control and efficient. Meaningfully, the size of situ general silica nanoparticles could be readily

controlled by adjusting the ammonia concentration in the aqueous solution and the reaction time. There are various factors that can affect the size of SiO2 particles [31]. In present work, through orthogonal experimental WDR5 antagonist design [32], we discuss the impact of Oxymatrine following three factors on the size of SiO2 particles: the quantity of tetraethyl orthosilicate (TEOS), the quantity of ammonia and the reaction time. Figure 1 The schematic diagram of the reaction. Methods Experimental section Materials Graphene nanoplatelets (GNPs) (diameter, 1 to 20 μm; thickness, 5 to 15 nm) were purchased from Xiamen Kona Graphene Technology Co., Ltd. (Xiamen, China). PAA (PH: 1–2) was purchased from

Tianjin Damao chemical reagent Co. Ltd. N,N-Dicyclohexyl carbodiimide (DCC) was purchased from Aladdin industrial corporation, Seattle, Washington D.C., USA. 3-Aminopropyltriethoxysilane (APTES) KH550 was purchased from Shanghai Yaohua Chemical Co. Ltd., Shanghai, China. H2SO4 (98%), HNO3 (65%), tetrahydrofuran (analytically pure), TEOS (AR), ammonia solution (AR), and ethanol (AR) were provided by Sinopharm Chemical Reagent Co. Ltd. (Shanghai, China). Oxidation of graphene nanoplatelets GNPs (900 mg) were suspended and refluxed in a mixture of concentrated acid H2SO4/HNO3 (30 ml/30 ml) at 140°C for 1 h, followed by diluting with deionized water (3,000 ml). The acid-treated GNPs were retrieved and washed repeatedly with THF until pH = 7 and dried under vacuum. The product was denoted as f-GNPs.