At nanometer scale, Si NPs in colloidal form exhibit visible photoluminescence (PL) with a high quantum yield because of the confinement effect which partly overcomes the indirect band gap and which can be tuned by the NP size [4–6]. However, PL from oxidized Si QDs has low radiative rates and is not spectrally tunable [7]. H-terminated Si QDs have spectrally tunable PL but also low radiative rates and are chemically unstable and easily oxidable [7, 8]. Dedicated surface engineering such as alkyl chains by organic capping involving

a carbon surface termination has led recently to bright luminescent Si NPs [9–13]. These NPs have stable surface passivation due to the strong covalent Si-C bond preventing photo-oxidation and aggregation in solution selleck screening library [14]. This allows also versatile (bio)functionalization [15]. They PXD101 are nontoxic [16] and show bright photo-stable blue-green PL with fast decay for 2- to 3-nm size [17, 18]. In this study, our goal is to use Si NPs as nanothermometers in nonpolar liquids (NPLs). The main application is temperature measurements (in the range of 0°C to 120°C) in lubricant for tribological studies of mechanical contacts. As dispersion in nonpolar liquids (alkane or alkenes for example) is required, we use alkyl surface termination. Nanothermometers

based on II-VI semiconductor QDs have been reported [19, 20]. In spite of some disadvantages of the II-VI materials relative to Si such as toxicity, Vildagliptin scarcity of material resource, and instability,

only few published works report on the use of Si NPs as nanothermometers [21]. We show an important PL peak position variation with temperature for Si NP colloids (approximately 1 meV/K). The investigation of Si NP luminescence property variation both with temperature and liquid medium viscosity gives an original demonstration of the exchange energy transfer (EET) importance in Si NP colloids. Methods Electrochemical anodic etching of p-type 10-Ω cm (100)-oriented Si wafer has been used for the preparation of nano-Si powder. Silicon substrate was etched in a solution containing 1:1 volume mixture of 48% hydrofluoric acid (HF) and anhydrous ethanol. The anodization was performed in a Teflon cell with a copper electrode as a backside contact. The this website counter electrode was made of platinum. Anodic current density was 45 mA/cm2 and etching time was 50 min. A permanent stirring of the etching solution was applied in order to evacuate hydrogen bubbles formed during the etching process. After the etching, a highly porous network constituted of numerous interconnected nanocrystals was formed.